Child pages
  • Check Animation
Skip to end of metadata
Go to start of metadata
(info) Note: This page assumes that bones have already been animated in Maya.(info)
Unable to render {include} The included page could not be found.

**UNDER CONSTRUCTION**

Import x-ray videos into Maya with correct x-ray camera perspectives

  1. Open a new scene in Maya
  2. Click Xcam in the XROMM maya tool shelf. A window will appear:
  3. Browse or type your MayaCam file in the MayaCam File Path box. This file likely have a name similar to [ Cube_Before/After_CamNumber_ImageNumber ]Mayacam.csv. This file will tell Maya how to create a camera that has the same alignment as the Xray camera did in the actual setup.
  4. For the optional Image Path, Browse to Find the appropriate undistorted image or image sequence. This is what will be shown  in frame when looking through the aligned Xray camera. 
    1. If you are checking calibration, this file will be the undistorted cube image. Leave Image sequence unchecked.
    2. If you are checking digitization or animations, this file will be the first in the sequence of undistorted .tif images of created from the Xray video. As long as all of the .tif files in the sequence are in a separate folder, you only need to select the first one. Check Image Sequence, and Maya will find the other files.
  5. Name your camera (perhaps Xcam1)
  6. Click import. The panel display will change to Xcam1 and Hardware Texturing will be selected automatically (as of Maya XROMM Tools 2.1.6).
  7. Repeat for Xcam2

If Xcam camera panel is not automatically selected,

  1. Close the XCam window
  2. Select Panels -> Perspective -> xrayCam1Shape1
  3. On the active camera window pane(s),
    • Select Shading -> Smooth Shade All
    • Select Hardware Texturing

If the images do not display, try this:

  1. Click on the image frame (will be called Xcam1_Plane).
    1. This can be done either in the main window, or through Window -> Hypergraph: Heirarchy, and then clicking on Xcam1_Plane.
  2. If the Attribute Editor is not open on the left side of your screen, open it by clicking on Window ---> Attribute Editor
  3. Select the tab Xcam1lambert; you may have to click on a black arrow next to tabs for popup menu of more tabs
  4. Click on the black arrow next to Color
    1. If you are working with a single image, such as a calibration cube image, uncheck the Use Image Sequence box
    2. If you are working with an image sequence such as an Xray video, uncheck and recheck the Use Image Sequence box
  5. Repeat steps 1-11 for second camera
  6. make sure that the end time of animation range and the end time of playback range match the number of images in your sequence. If your image sequence does not start at 1, make sure the start and end times of the animation and playback range match the starting and ending numbers of your image sequence.

Unknown macro: {center}                 Table of Contents                

Unknown macro: {center}                      Workflow Diagrams                      


**UNDER CONSTRUCTION**

Understanding Xray Camera Setups

Once you have imported one or more Xray cameras into Maya, you can use them to check that your data makes sense. 

  • To look through either of the Xray cameras, select Panels -> Perspective -> [Desired camera]
  • When looking through these perspectives, imported Xray marker coordinates, cube marker coordinates, animation objects etc. should line up with the Xray behind them. The following are examples of what digitized markers and animated bones should look like.

  • (minus) If the cube marker coordinates, animation objects etc. don't line up with the Xray image behind them, there is a mistake somewhere. You should go back and check that you have done everything correctly so far. (minus)
  • Looking through the Persp camera (Panels -> Perspective -> Persp) you should also be able to toggle around the screen and see the whole scene as it was set up in the Xray lab. The Xray emitters will be indicated by little green camera animations, and the image intensifiers are where the Xray images appear.
  • (minus) If the scene seems incorrect (Especially if the cube marker coordinates, animation objects etc. are behind the Xray plane, rather than between the Xray camera and the Xray image) it is likely that something went wrong, and you should check that you have done everything correctly so far.  (minus)
  • If you imported an animation or image sequence, press play in the lower right corner of the screen to see the whole animation (orange circle). The cube marker coordinates, animation objects, etc. should continue to line up with the Xray Camera behind them.
    1. The animation range you wish to see must fit within the time in the Blue and Yellow boxes, where Blue is the start frame and Yellow is the end frame.
    2. Understanding how to play your animation
      1. The Green and Red boxes are the whole range that the animation sequence can currently be played from. 
      2. To play only part of that, you can change the numbers in the Blue and Yellow boxes.
      3. You can also drag the Purple dots to change the current segment being played (Blue and Yellow boxes). 
      4. The white number 90 and the 90 in the box indicate the current frame.
  • To change your view, click PSDR in the XROMM shelf.
    • To zoom in and out, click and hold the left mouse button and move your mouse left and right.
    • To pan, click and hold ctrl + left mouse button, and move the mouse left, right, up, or down.
    • To change the transparency of a bone model or markers, click and hold the middle mouse button, and move the mouse left and right.
  • If you wish to view the scene through both Xray Cameras at once,
    • Go to Panels -> Panel Editor -> Edit Layouts -> two planes side by side
    • Use Panels -> Perspective and select one of the two x-ray cams for each panel.